Smart Plant

Description

Introducing the Smart Plant - the ultimate device for monitoring your plant's health! With the Smart Plant, you can measure a range of parameters such as soil moisture, ambient light, and air temperature & relative humidity.

Equipped with IoT capabilities, this device can stream the measured parameters directly into your favorite platform like Home Assistant, allowing you to keep an eye on your plant's health from anywhere. You can also view the data directly on the integrated 2.9" e-paper display, making it convenient for you to check on your plant's health at any time.

With its sleek and modern design, the Smart Plant is the perfect addition to any home or office. Its easy-to-use interface and accurate measurements make it the go-to device for any plant enthusiast!

What's in the box

• A fully soldered Smart Plant board, ready to be programmed by you, using the Arduino IDE or the recommended configuration for ESPHome.

And optionally, you can add

• 1000mAh LiPo battery, ready to plug and power your Smart Dashboard.
• 296x128, 2.9inch e-paper display panel.

Documentation

Find everything you need to know about the Smart Plant in the official documentation website (https://smart-plant.readthedocs.io). Always updated and 

Features

	Since it is based on the extended ESP32-S2 microcontroller you can upload the ESPHome firmware and connect it with your Home Assistant setup or simply upload your own Arduino codes.
	Open-source. If you have any questions or suggestions about the board, just check out the extended documentation, and if you still want to  dig deeper, check out the design files on Github
	Simple and clear. Check out at a glance your plant's state on the 2.9" e-paper screen. You can program your own data layout so you have everything you want to see at first sight.
	Embedded sensors. Stop worrying about having to connect multiple sensors to measure your plant's health. On the Smart Plant, you have all the sensors you need already on a PCB

Specifications

Microcontroller