Description:
It can be widely used to detect NPN and PNP transistors, capacitors, resistors, diodes, transistors, N-channel and P-channel MOSFETs, IGBTs, JFETs, triacs and batteries, etc.
It can also be used to detect infrared waveforms and Zener diodes. In addition, it has a self-calibration function.
After detection, aim the infrared remote control at the "IR" light, and then press the button on the remote control. If the detector successfully decodes, it will display the data code and infrared waveform.
It is worth mentioning that it has the function of one-click operation, automatically detects and shuts down. You can also press the Multi-function button to turn off the detector.
Place the pin of the component in the corresponding area, and then toggle the small handle, the detector will automatically test it, and the final result will be clearly displayed on the backlight TFT screen
Feature:
Measurement results display in TFT graphic (160x128)
One-button operation
Auto power off (timeout setting)
Built-in high-capacity rechargeable lithium-ion battery
Lithium-ion battery voltage detection
Support Chinese and English
Warning: Built-in lithium-ion battery, it is strictly forbidden to immerse the tester in water or near heat source!
Warning: For your personal safety, please strictly observe the specifications and precautions for using lithium-ion batteries!
Specification:
Size: 70*90*26m/ 2.71x3.58x1.10 inch
Display: TFT Screen, Color Screen
Diode Range: less than 4.5V
Zener Diode:Transistor Detect Area: 0.01-4.5V
Zener Diode Detect Area: 0.01-30V
Triac Range: IGT less than 6mA
Capacitance: 25pF-100mF
Resistor: 0.01-50MΩ
Inductance: 0.01mH-20H
Power Voltage: 3.7V
Battery: 0.1-4.5V
Power: Built-in Rechargeable Lithium Battery
Item Size: 8.8 x 7 x 2.8cm
Item Weight: 111.5g / 3.94oz
Package Size: 14.5 x 12 x 2.7cm / 5.71 x 4.73 x 1.06in
Package Weight: 114g / 4.02oz
Package List:
1 x TFT transistor tester
1 x Electronic component set (randomly sent)
3 x Test hooks
1 x Cable